The powerful high-output flight movable bending conveyor СПЦ334 is intended for operation within mining complexes to deliver coal, oil shale, potassium ores from the breakage faces at the seam thickness at least 1.5 m and angles of dip up to 35°, as well as at the rise or dip with the seams angle up to 10° in mines of any gas and dust hazard category.

• The conveyor drives are equipped with the devices for their fixing and moving.
• The head drive has the possibility of turning in the horizontal and vertical planes, as well as it is equipped with the hydraulic device for the adjustment of the traction member tension.
• The drive units are equipped with the water cooling system.
• The drive shaft rolls out on its own supports with butt seals of the bearing cases.
• The panline ensures bidirectional movement of the traction member.
• The pans have the lower bottom for protection of the traction member idle branch from gumming.
• The inspection pans have convenient and reliable removable hatches.
• The implements can be either welded to the panline or removable.