Mobile-type face scraper conveyer CП326-40 is designed for operating as a part of mechanized complex for delivery of coal of any hardness, oil shale or potassium ore from the breakage face at developing gently sloping seams from 0,85 m long, moving along the strike with the pitch angle being up to 35º or to the rise or dip up to 10º, in collieries of any gas and dust hazard class.

• The conveyer is designed to operate with breakage face cutter-loaders with cutting and feed unit drives, located on the face bench. The conveyer can be employed with all types of supports and cutter-loaders complying with the seam thickness, manufactured in Ukraine and abroad.
• The conveyer drives are furnished with devices for their fastening and hauling. The main drive may be completed with a hydraulic lifting device to adjust the spill height. Easily removable drive gears are supported as a cantilever on the reduction gear shaft.
• Drive units may have single or double speed electric motors. The drive units may be put parallel or perpendicular to the pan flight. To adjust chain tension in units a reliable friction brake is mounted.
• The pan flight of the conveyer ensures two-directional motion of the hauling member, and is manufactured with the lower bottom to prevent from the idle chain strand jamming. Inspection pans are provided with quickly removable inspection hole covers. The pan flight design ensures the disposition and traveling of the cutter-loader skid along a powerful share, welded to the pan flight. The beam of the mounted equipment can be welded to the pan flight or it can be detachable.