|
|
|
|
4/6, ul. Svet shakhtyora, Kharkov, 61001, UKRAINE
Tel. (057) 733-36-37, 733-09-69
Fax (057) 731-50-66, 733-19-53
Telex:125176 БЕЛКА
e-mail:
[email protected]
Internet: http://www.shaht.kharkov.ua |
 |
|
 |
|
|
| |
|
| |
| Public Joint Stock Company "Kharkiv Machine Building Plant "SVET SHAKHTYORA" |
|
СOAL PLOUGH UNIT CH 06
The СOAL PLOUGH UNIT CH06 of sliding type is designed to mechanize main production processes of mining and conveying coal in the long wall faces up to 230 m long developing 0,85 - 1,4 m seams along the strike with the bedding angle being up to 25°, being developed to the rise with the bedding angles up to 12°, to the dip up to 8° and cutting resistance at а minimum seam thickness in the stable zone up to 300 kN/m and in the area of the cutting tool not more than 170 kN/m, at maximum seam thickness in the stable zone not more than 150 kN/m and in the area of the cutting tool not more than 80 kN/m with self-collapsing top coal band.
- The СOAL PLOUGH UNIT CH06 consists of a conveyer with drive heads, a sliding type plough, hydraulic equipment, electrical equipment with the automatic control system of the Plough Unit.
- The СOAL PLOUGH UNIT CH06 can operate with individual and mechanized supports, both in the right and in the left face with the remote control by current collectors and automatic reverse of the conveyer and the Plough Unit drives.
Technical Data
Parameters |
Parameter values |
| Efficiency of the breakage face extraction, m2/min, not less than: |
5,2 |
| Applicability according to cutting resistance of coal, kN/m, not more than: |
| - in the stable zone of the seam |
150 ... 300 |
| - in the area of operation of the cutting tool |
80 ... 170 |
| Operating member (plough): |
| Nominal power of the plough drives, kW |
2х65/200 |
| Speed, m/s |
1,93 |
| Hauling member |
large link chain |
| Chain gauge, mm |
34x126 |
| Limits of height adjustment, mm |
from 740 to 920 |
| Pitch of stepped adjustment of the operating member height, mm |
90 |
| Adjustment limits of lowering ground cutters relative to the bottom edge of the angle piece tip, mm |
0...40 |
| Ground cutter overhang into the face relative to the angle piece edge, mm |
70 |
| Plough control instruments |
АРУС3.1М.УХЛ5 |
| Lighting fixture |
lamp CCO3-1M |
| Dust suppression |
irrigation with water |
| Irrigation system |
automatic, section type |
| Conveyer: |
СПЦ271М type |
| Total power, kW |
2х160 |
| Height of the middle part of the conveyer (along the board side), mm |
540 |
| Hauling member |
scraper chain |
| Quantity of chain strands |
two, central-twin |
| Gauge |
26х92 |
| Chain speed, m/s |
0,85 |
| Pan width, across internal walls of the side member |
692 |
|
Designers: Public Joint Stock Company "Shakhtinsk Coal Research Institute",
Public Joint Stock Company "Kharkov Machine Building Plant "Svet Shakhtyora" |
Manufacturers: JSC"Rostovgormash"LTD,
Public Joint Stock Company "Kharkov Machine Building Plant "Svet Shakhtyora" |
| Complete composition of the plough unit and design of individual assembly units can be specified when placing the order. |
| Certificate No UA2.003.969 In compliance with State Standard of Ukraine ISO 9001-2001 | |
| | | We provide high quality, advanced technologies, warranty and after - warranty servicing. | |
|
|
|
